
Whole-Home Backup System
Power
Experience

Backup Power Ever Lasts
E10 is also compatible with existing 120V / 240V AC generators for up to 9.6kW bypass.
Even 5-Ton Central A/C
Uncompromised Living
Stackable with Plug & Play
Full Installation Support Service
Extend Backup When It Matters Most
5 Hours of Charging, 24 Hours of Peace
- The World's First Smart Hybrid Whole-Home Backup Solution
- As of January 12, 2026, the first commercially available whole-home backup solution with integrated DC range extended technology — combining battery storage, solar charging, and smart tri-fuel generator in a unified platform.
- LRA & kW Startup Ability Ratings
- E10 uses special start technology that reduces LRA while extending startup time during off grid.
- Single E10 + 1 Pack: 28.8kW (120 LRA) | 2+ Packs: 37.2kW (155 LRA) | Dual E10: 66kW (275 LRA)
- The LRA (Locked Rotor Amps) of central air conditioning systems increases with the age of the unit. Please estimate based on the actual years of use and the nameplate LRA to ensure that the actual LRA of the air conditioner is within the E10 155 LRA capacity range. If it exceeds the E10 LRA ability, it is recommended to install a soft starter to ensure the central air conditioner can operate normally during power outages. According to theoretical calculations, the aging rate of LRA is as follows. Note that the actual LRA aging rate should be determined based on actual conditions:
- LRA aging rate 0% in 10 years
- LRA aging rate 20% over 10 years
- 5X Backup Time
- Tested over 12 hours with fluctuating home loads totaling 10kWh. When powering the same energy demand, E10's DC range extended technology generates 5 times more than traditional standby generators (20kW) with the same fuel.
- ≤20ms Seamless Switchover
- Anker SOLIX Power Dock Required
- Reduce Up to 80% Electricity Bills
- Anker SOLIX Power Dock or Smart Inlet Box Required
- Powered by Anker SOLIX Power Dock or Smart Inlet Box with AC Coupling with Self-Consumption and TOU mode, excess solar enabled. 80% is calculated based on families with 9kW solar panels in california. Actual results may vary.
- 1-Day to 15-Day, 6kWh to 90kWh
- Singe (30kWh Max) | Dual (60kWh Max) | Triple (90kWh Max), for Dual E10 or more, Anker SOLIX Power Dock Required.
- Calculated based on essential american households electricity usage during blackouts, actual results may vary.
- 9-27kW Solar Input
- Singe (9kW Max) | Dual (18kW Max) | Triple (27kW Max), for Dual E10 or more, Anker SOLIX Power Dock Required.
- Works with third-party solar supporting Frequency Shift (CA21, IEEE 1547-2018+). Anker SOLIX Power Dock or Smart Inlet Box Required
- Turbo Output
- 10kW Turbo Output per unit sustains 90 minutes at 86°F (30°C). Requires 2+ Battery Packs. Actual duration varies with temperature.
- Single (10kW Turbo, 7.6kW Rated) | Dual (20kW, 15.2kW) | Triple (30kW, 22.8kW). Turbo requires 2/4/6 Packs respectively.
- Compatiable with AC Generators
- To ensure stable charging of E10 from the generator, it is recommended to use a generator with THD < 10%.
FAQ
How many smart branch circuits does Anker SOLIX Power Dock support?
What is the difference between Whole-Home Backup Power and Partial Home Backup Power for Anker SOLIX Power Dock?
Which Anker SOLIX devices does Anker SOLIX Power Dock support?
Which circuit breakers are compatible with Anker SOLIX Power Dock?
Is Anker SOLIX Power Dock compatible with third-party PV inverters?
During the preparation phase for installing Power Dock, what should be noted regarding the main breaker?
Does Anker SOLIX Power Dock support long-term outdoor use?
How many Anker SOLIX E10 units can be connected to Anker SOLIX Power Dock?
155A (1 Inverter, 2+ Batteries)
275A (2+ Inverters, 2+ Batteries Each)
*<3 hours when the current exceeds 12A
7,680W, 240V / 32A





