Skip to main content

S5000 Launch Exclusive: $1,100 OFF + Free Gifts Worth Up to $2,499   Shop Now >

23
:
Hrs
53
:
Min
55
Sec

E10: The World's First Smart Hybrid Whole Home Backup System   Shop Now>>

Whole-Home Battery Backup Systems

Whole-Home Battery Backup Systems

Keep your home ready for outages with Anker SOLIX whole-home battery backup systems. Enjoy reliable protection for essential appliances, expandable storage, convenient automatic backup & smart energy management to reduce your electricity costs.

What Is Whole-Home Backup Power?

Whole-home backup power provides a reliable electricity supply during grid outages, helping your household stay comfortable and connected. Unlike small portable power stations, a properly configured whole-home battery backup system connects to household circuits, supporting essential appliances such as refrigerators, lighting, and Wi-Fi, as well as larger equipment when capacity allows.
A whole-home battery backup typically combines rechargeable batteries, an inverter, and switching equipment. It stores electricity from the grid or compatible solar panels and converts that energy into usable household power during an outage.
Beyond emergency protection, good battery backup systems offer quiet, fuel-free operation and smarter home energy management. Compatible systems can store excess solar energy or use electricity during lower-cost periods to reduce energy bills. Explore Anker SOLIX whole-home battery backup systems for expandable storage, flexible power protection, and greater control over your household energy use.

How Does a Whole-Home Battery Backup System Work?

A whole-home battery backup stores energy before an outage and delivers it safely when utility power becomes unavailable. Here is how a properly installed system works for your home.
1. Battery Charging and Energy Storage: The system charges batteries from an approved grid connection, compatible solar panels, or both. Battery controls monitor the charging conditions. Stored energy is measured in kilowatt-hours (kWh), which helps determine how long loads can operate.
2. Grid Outage Detection and Power Transfer: When grid power fails, transfer equipment isolates backed-up circuits to prevent unsafe backfeeding. Automatic home battery backup with Power Dock detects the interruption and transfers power automatically, while manual transfer equipment requires you to activate backup according to the installed procedure.
3. Battery Power Supply to Household Circuits: The inverter converts stored direct-current (DC) energy into alternating-current (AC) electricity for compatible household loads. Refrigerators, lights, internet equipment, pumps, and some larger appliances can continue operating, provided their combined running and startup requirements stay within the system's capabilities.
4. Recharging Through Solar Panels or Grid Power: After utility service returns, grid charging can replenish the batteries. When compatible solar panels are installed, sunlight may also recharge the system during an outage, subject to weather, available generation, and system settings. Solar generation can extend backup duration, making a reliable complement to ensure uninterrupted power supply.

How to Choose the Right Home Battery Backup System?

The best home battery backup system is sized around your actual appliances and outage goals, not simply your home's square footage. Follow these five steps to find the right battery backup for your home.
Step 1: Identify the Appliances to Power: List essential devices first, including refrigerators, Wi-Fi, lighting, medical equipment, and sump pumps. Then add optional loads such as central air conditioning or cooking appliances. Decide whether you need essential-circuit protection or wider whole-home coverage.
Step 2: Calculate Running and Startup Wattage: Add the running wattage of appliances that may operate simultaneously. Check the higher startup demand of compressors, pumps, and air conditioners. Select a home battery system with sufficient continuous AC output and verified surge capability, allowing room for overlapping loads.
Step 3: Estimate Your Required Backup Duration: Multiply average load in kilowatts by desired operating hours to estimate energy consumption. For example, a steady 1 kW load running for 10 hours requires roughly 10 kWh before inverter losses and battery reserves. Allow extra capacity for real-world conditions.
Step 4: Choose Between Manual and Automatic Backup: Manual battery backup kits suit homeowners comfortable activating backup through professionally installed transfer equipment. Automatic systems with a compatible Power Dock detect grid interruptions and switch to battery power without user intervention. Compare equipment, convenience, and installation requirements.
Step 5: Consider Solar Compatibility and Future Expansion: If outages may last for days, look for compatible solar charging and additional battery modules. An expandable home battery backup system offers flexibility as your household demands change. Confirm maximum battery capacity, solar input limits, and required accessories before choosing your configuration.

Shop Anker SOLIX Home Battery Backup Systems

Anker SOLIX offers flexible whole-home battery backup systems for different household needs. Whether you want to protect essential appliances, enjoy automatic backup, or prepare for extended outages, explore these E10 configurations to find the right balance of power, battery capacity, and convenience.

Starter & Manual Backup Kits for Essential Home Power

Best for: Smaller homes, cabins, or households that need backup for refrigerators, lighting, Wi-Fi, and other essential appliances, with approximately 6–12 kWh of storage.
Recommended configurations:
  • E10 Starter (Power Module + Battery): Provides approximately 6 kWh of storage and 7.68 kW continuous AC output for compatible appliances.
  • E10 + Smart Inlet Box: Combines the E10 power module and battery with a Smart Inlet Box for a professionally installed, grid-connected manual backup setup.
  • E10 + Transfer Switch: Includes the E10 power module, battery, and compatible transfer equipment for manually switching selected household circuits to backup power.

Automatic Backup Kits for Seamless Power Transfer

Best for: Families who want essential household circuits to receive backup power automatically during outages.
Recommended configurations:
  • E10 + Power Dock: Combines approximately 6 kWh of battery storage with a Power Dock for automatic switching between grid and battery power, making it a convenient starting option.
  • E10 + 2 Batteries + Power Dock: Provides approximately 12 kWh of storage with automatic backup, ideal for households requiring longer backup duration.
With Power Dock, these on-grid home battery backup kits can switch to battery power in 20 milliseconds or less under specified conditions, reducing the need for manual intervention.

Expanded-Capacity Systems for Longer Outages

Best for: Larger households, homes with multiple appliances, or users who need extended backup power for refrigeration, pumps, and HVAC systems.
Recommended configurations:
  • E10 + 3 Batteries: Offers approximately 18 kWh of storage for longer backup duration.
  • E10 + 4 Batteries: Provides approximately 24 kWh for households with greater energy requirements.
  • Multiple E10 Modules + Power Dock: Combines additional power modules, batteries, and a Power Dock to support higher simultaneous power demands and broader whole-home backup coverage.
Additional home batteries extend runtime of your grid-connected household backup, while multiple power modules increase available continuous output.

Solar-Integrated Backup Kits for Extended Energy Independence

Best for: Homes with suitable solar exposure, off-grid properties, or households seeking additional charging options during prolonged outages.
Recommended configurations:
  • E10 Prime Off-Grid Kits: Feature one E10 power module and two batteries, delivering approximately 12 kWh of storage, 7.68 kW continuous AC output, and up to 9 kW solar input. Available with 10 or 20 rigid 440W solar panels for smaller off-grid homes, cabins, and households with moderate energy requirements.
  • E10 Ultra Off-Grid Kits: Feature two E10 power modules and four batteries, providing approximately 24 kWh of storage, 15.36 kW continuous AC output, and up to 18 kW solar input. Available with 10 or 20 rigid solar panel configurations, ideal for larger off-grid properties, heavier simultaneous loads, and longer backup requirements.
Both off-grid systems support compatible solar charging and generator integration for added flexibility. Solar panels are optional additions, and actual energy generation depends on sunlight and installation conditions. Select a panel package that matches your energy needs and the system's electrical limits.

Why Choose Anker SOLIX Whole-Home Battery Backup?

Anker SOLIX combines powerful battery backup, expandable storage, and smart energy management to meet your household's electricity needs. Whether you want reliable power during outages, convenient automatic switching, or better control over daily energy costs, we offer flexible solutions for your home.

Reliable Power for Essential and Whole-Home Loads

One E10 power module delivers 7,680W of continuous AC output through a 120V/240V split-phase connection. With at least two batteries, it also supports up to 10kW Turbo output for 90 minutes, helping you manage periods of higher power demand. Its strong startup capability supports various motor-driven appliances, from refrigerators to air conditioners, keeping your home comfortable and essential devices running during outages.

Expandable Battery Capacity for Longer Backup

Each Anker SOLIX B6000 battery module stores approximately 6.1 kWh. One E10 power module supports up to five batteries, providing around 30 kWh of nominal storage, while configurations with three E10 units and Power Dock can reach approximately 90 kWh. This modular approach allows households to begin with essential-load backup and add capacity when longer runtime or broader coverage becomes necessary.

Automatic Backup for Greater Convenience

For homes where uninterrupted routines matter, an E10 paired with Power Dock offers automatic backup activation and a published switchover time of 20 milliseconds or less under qualifying conditions. There is no need to operate a transfer switch when the grid fails. The battery backup system for home also supports monitoring through the Anker app, so you can review battery levels and system operation remotely.

Flexible Installation and Long-Term Dependability

Anker SOLIX whole-home battery backup supports floor or wall mounting, allowing flexible placement to suit your property's layout and site conditions. The power and battery modules have NEMA 4 (IP66) enclosures, while the Smart Inlet Box and Power Dock have NEMA 3R ratings. With UL 9540 certification and UL 9540A testing, the system offers dependable, long-lasting energy storage, giving you greater peace of mind during unexpected power outages.

Smart Energy Management to Lower Electricity Bills

Anker SOLIX whole-home backup systems go beyond emergency backup with smart energy management features. Compatible grid-connected configurations support solar self-consumption and Time-of-Use (TOU) modes, allowing you to store excess solar energy or charge batteries during lower-cost electricity periods. Using stored energy when grid rates are higher can help reduce electricity bills and improve your home's energy efficiency.

How Much Does a Whole-Home Battery Backup System Cost?

In the United States, home battery backup systems typically cost $5,000–$18,000 installed for essential-load protection, while larger whole-home systems can range from $24,000–$40,000 or more. Total costs depend on the battery capacity, system configuration, and installation requirements.
Key costs include:
Battery Storage: Approximately $5,000–$13,000 per battery system, depending on capacity.
Inverter: Around $1,000–$4,000 if purchased separately; some systems include built-in inverters.
Backup Gateway or Transfer Switch: Roughly $1,000–$4,500 for switching equipment and associated electrical work.
Professional Installation: Approximately $1,500–$5,000 for labor, wiring, and system setup.
Permits and Inspections: Typically $200–$1,000, depending on local requirements.
The prices may overlap when equipment and services are bundled. Anker SOLIX offers a cost-effective starting point, with E10 systems starting at $4,299, including battery storage and an inverter. Manual backup kits start at $4,599, while automatic Power Dock kits start at $5,799, excluding installation. Check out to buy a reliable and affordable battery backup system for your home.

How to Install a Whole-Home Battery Backup for Your Home

Installing Anker SOLIX home battery backup systems involves more than placing batteries beside an electrical panel. Use the following process to plan a code-compliant installation and confirm that the system will operate as intended.
Step 1: Assess household loads and electrical service. List the circuits you want to protect, check their running and startup loads, and review your main panel's capacity. A qualified electrician can determine whether the proposed configuration is suitable.
Step 2: Select your E10 configuration. Choose the battery count and power modules, then decide between manual transfer equipment and Power Dock for automatic backup. Add compatible solar panels only after confirming the permitted electrical design.
Step 3: Choose a safe installation location. Confirm required clearances, mounting strength, cable routes, and flood exposure. Anker SOLIX E10 supports wall or floor mounting, but its weather-rated enclosure does not eliminate local siting and safety rules.
Step 4: Arrange permits and professional electrical work. Have a licensed electrician install the Smart Inlet Box, transfer switch, or Power Dock and required isolation equipment. The installer should handle applicable permits, inspections, and utility coordination.
Step 5: Configure, test, and maintain the system. Complete manufacturer-approved battery connections, configure the Anker app, and test the transition into backup mode. Review supported loads and charging settings. Follow the manuals when expanding battery capacity or changing system components.

FAQ









Loading