Two Ways to
Whole-Home Backup
Whole-Home Backup
Automatic seamless backup or manual backup with smart daily savings — both paths lead to whole-home power.
Anker SOLIX Power Dock
The Automatic Energy Gateway to E10
200A Whole-Home Backup, Uncompromised Living
Every circuit covered. Unlike systems with only 100A that force you to pick and choose which rooms stay powered during outage. E10 with 200A Power Dock protects your entire home panel, so every outlet works exactly like the grid never went down. No limitations. No lifestyle compromises. Just complete peace of mind.
Smart Whole-Home Energy Control
Power loss? You won't even notice. While traditional generators take 10 - 30 seconds to start, Power Dock activates your backup power under 20 ms—swift enough to keep your devices and data safe. Now, you can stay powered without missing a beat.
Multi-Source Power Connectivity
Supports up to 42.3kW total solar input. Seamlessly integrates third-party AC solar systems at 15.3kW capacity with 27kW from portable or rigid solar panels via E10 integration*.
Reduce Up to 80% of Electricity Bills
Optimized energy savings. Works seamlessly with existing solar power systems and grid connections through AC coupling, storing 100% of excess solar power and off-peak electricity to avoid expensive peak rates and maximize your savings.
AC Coupling. Works with grid
Works with your solar panels
Self-Consumption Mode
Time-of-use Mode
Adaptable Setup for Easy Installation
Save time and costs. Install the automatic transfer switch box and combiner box together or separately to suit your setup. Position the switch box near your main panel for cleaner wiring and a smoother installation experience.
Anker SOLIX Smart Inlet Box
The Manual Backup with Smart Daily Savings Inlet Box to E10
Whole-Home Backup & Saving
Backup Port keeps your home powered during hurricanes, winter storms, and emergencies. On-Grid Port cuts energy bills daily with smart cycling — no extra effort required.
Reduce Up to 80% of Electricity Bills
Optimized energy savings. Works seamlessly with existing solar systems and grid connections through AC coupling, storing 100% of excess solar power and off-peak electricity to avoid expensive peak rates and maximize energy use.
Effortless Setup
Flexible for Every Home
Flexible for Every Home
Licensed electricians can have it ready in hours, no load transfer needed.
NEMA 3R Ultimate Resilience
All-weather protection. Designed for indoor or outdoor use, it's protected against rain, snow, and dust, and operates smoothly from -4°F to 131°F.
Always One Step Ahead of the Storm
E10 proactively monitors severe weather and charges itself to full capacity using solar and grid power-so you don't have to. When outcages strike, timely power level reminders keep you informed, ensuring you're prepared for anything the storm throws your way.
Choose Your Switch Solution
Standard Inlet Box provides basic manual backup. Smart Inlet Box adds daily bill savings through smart cycling. Power Dock delivers automatic ≤20ms switchover with 200A whole-home coverage and intelligent load management.
FAQ
How many smart branch circuits does Anker SOLIX Power Dock support?
What is the difference between Whole-Home Backup Power and Partial Home Backup Power for Anker SOLIX Power Dock?
Which Anker SOLIX devices does Anker SOLIX Power Dock support?
Which circuit breakers are compatible with Anker SOLIX Power Dock?
Is Anker SOLIX Power Dock compatible with third-party PV inverters?
During the preparation phase for installing Power Dock, what should be noted regarding the main breaker?
Does Anker SOLIX Power Dock support long-term outdoor use?
How many Anker SOLIX E10 units can be connected to Anker SOLIX Power Dock?
Anker SOLIX E10 Power Module
Anker SOLIX B6000 Battery Module
Anker SOLIX Power Dock
Anker SOLIX Smart Inlet Box
Anker SOLIX 5500 Smart Generator
Output
Rated Voltage
120 / 240 VAC (Split Phase)
Rated Frequency
60Hz
Maximum Continuous Output Power (With Battery)
7,680W, 32A
Turbo Backup Output Current (With two Batteries)
10,000W, 41.6A (90 Minutes)
LRA Equivalent Ability
120A (1 Inverter, 1 Battery)
155A (1 Inverter, 2+ Batteries)
275A (2+ Inverters, 2+ Batteries Each)
155A (1 Inverter, 2+ Batteries)
275A (2+ Inverters, 2+ Batteries Each)
Input
AC Input Port Recharging
1,800W, 120V / 15A
*<3 hours when the current exceeds 12A
7,680W, 240V / 32A
*<3 hours when the current exceeds 12A
7,680W, 240V / 32A
AC Input Port Bypass
9,600W, 240V / 40A
PV (Solar) Input
2*4,500W, 30 to 450V(DC), 15A(Imp)
DC Generator Input
4,500W
Resilience
Warranty
5 Years
Enclosure Type
NEMA TYPE 4 (IP66)
Operating Temperature
-4 °F to 131 °F (-20~55°C)
General
Connectivity
Wi-Fi, Bluetooth
Dimensions (W x H x D)
26.4" x 11.8" x 10.2" (670 x 300 x 260 mm)
Weight
60.6lb（27.5kg）
