Anker SOLIX F2000 + BP2000 Expansion Battery + 6-Circuit Manual Transfer Switch

To connect, align the cable with the Anker logo in the center and insert it directly. To disconnect, push the knob in the center and turn the cable slightly to the left (12.5 degrees) before pulling it out.

The extra battery cannot be used separately. It must be connected to the power station to charge or discharge, and to monitor its status via the Anker app.

-Turn off all outputs when not using the products to avoid draining the battery.

-Store in a dry and cool area.

-Check the battery capacity weekly. If the battery is below 30%, charge the power station to 100%. Fully charge it once every 3 months.

- Connect to a network before using the app for the first time. After connecting successfully, you can connect to devices off-grid (Wi-Fi not supported).

- The IoT light flickers when Bluetooth is turned on. Turning Bluetooth off will save battery.