Skip to main content

Black Friday | Solarbank 4 Pro | Save Up to £1,200 + Free Gifts

10
:
Days
15
:
Hours
54
:
Minutes
34
Seconds

The Longest-Lasting 2kWh Portable Power Station | Anker SOLIX S2000 | Up to 24 Hours of Home Backup

Anker SOLIX Smart Meter Gen 2

£89.00£119.00
  • Sign Up for Exclusive Offers. Save Up to £500 or Get 12% Off (Based on MSRP)

  • AnkerCredit Exchange

  • Turn credits into discounts.

Smart Meter Gen 2 (Single-Phase)
£89.00
£119.00
Single CT Cable Assembly (120A)
£35.00
£44.00
Single CT Cable Assembly (63A)
£35.00
£44.00
Dual-Circuit Monitoring. Total Energy Control.
Smart Meter Gen 2 independently monitors your grid supply and your energy storage or third-party solar systems. See exactly where your power comes from and where it goes.

Note: This function is only supported on Solarbank 4 Pro.
Active Circuit Protection. Uncompromising Safety.
Equipped with intelligent overcurrent detection, Smart Meter Gen 2 continuously monitors high-load grid connections. If a risk is detected, it instantly signals your Solarbank to dynamically reduce output power, preventing overloads and keeping your system safe.

Note: This function is only supported on Solarbank 4 Pro.
Set Up Without the Stress
  • Snap-In Technology: Features premium Weidmüller SNAP IN connectors for lightning-fast, tool-free, and highly secure wire connections.
  • Versatile CT Cables: Choose from two CT cable options: 63A (10 mm hole) or 120A (16 mm hole).
  • Quick DIN Rail Mount: Simply insert it into the slideway to install.
Half the Space, Fits Anywhere
At just 19 mm thick, Smart Meter Gen 2 saves 50% of distribution board space compared to the previous generation.

Supports Wi-Fi, Bluetooth, and RS-485 Connectivity

Backed by a 2-Year Warranty and a 10-Year Lifespan
Smart Auto-Correction for CT Wiring Errors
Smart Meter Gen 2 (Single-Phase) can automatically identify and correct the following wiring errors during installation:
1. CT clamp mismatched to L1 / L2 / L3 phase conductors.
2. CT polarity reversed.

Note: Auto-correction for CT polarity reversal and phase mismatch is coming soon.

Disclaimers:
1. Installation must be performed by a qualified electrician in accordance with the instructions.
2. The auto-correction function is only supported on Solarbank 4 Pro.

What's in the Box (Single-Phase)

Quick Installation

FAQ

The new generation Smart Meter features the following key upgrades:

1. Dual-Measurement Design: Compatible with both new solar and storage installations, and existing PV retrofits, enabling seamless integration of third-party PV systems into a unified energy management system.

2. Active Branch Circuit Protection: Protects the dedicated circuit connected to your Anker devices. It automatically reduces output power when approaching the safety threshold set in the app, proactively preventing overcurrent risks and ensuring safe operation of your home's electrical circuits.

3. Tool-Free Installation: Both the voltage sampling and RS485 ports feature SNAP IN terminals for quick, tool-free wiring.

4. Home Assistant Integration: Fully supports integration with the Home Assistant smart home platform.

5. Auto-Correction for CT Polarity Reversal and Phase Mismatch: Coming soon for Smart Meter Gen 2 (Three-Phase).

Once Anker SOLIX Smart Meter Gen 2 is installed, the Anker app displays:

1. Real-time power usage data, including power, voltage, and current.

2. Daily power usage data, including 24-hour power curves, total grid import energy, and total grid export energy.

3. Historical power usage data, including daily, weekly, monthly, and yearly energy consumption.

All data is viewable as total data or per-phase values.

Yes. Anker SOLIX Smart Meter Gen 2 features built-in anti-backflow functionality. The meter uses dual current transformers (CTs) to monitor the direction of power flow on both the grid supply circuit (GRID) and the photovoltaic / energy storage system (PV / ESS) circuit.

Once backflow is detected, the meter transmits a command to the connected Anker SOLIX PV / ESS devices via Wi-Fi or RS485 within 3 seconds. The devices automatically adjust their output to keep feed-in power below the set threshold, with no manual intervention required.

We recommend engaging a certified electrician to carry out the installation.

Yes. Anker SOLIX Smart Meter Gen 2 features a dual‑measurement‑point design, supporting both new PV‑plus‑storage installations and retrofits of existing PV systems.

CT (GRID) monitors the household main circuit, while CT (PV / ESS) monitors the existing rooftop PV circuit. This allows a single meter to manage both newly installed energy storage systems and existing PV systems within a single energy management platform.

Note: The three-phase smart meter includes a triple CT cable assembly. To monitor an existing PV system, an additional CT cable set must be purchased separately from the official website.

Yes. It supports Modbus TCP and TCP/IP transparent transmission protocols, allowing it to communicate directly with Home Assistant over a local network without cloud relay for real-time power monitoring and automation.

Accuracy Class: Class 1

Measurement Accuracy at Normal Operating Temperature):
1.Voltage: +1%
2.Current: +1% (1 - 120A), +2% (<1A)

The voltage sensing port RS485 ports on Anker SOLIX Smart Meter Gen 2 feature tool-free

SNAP IN terminals, allowing wires to be automatically secured upon insertion. It supports crimped ferrules, single-core solid wires, and multi-core stranded wires. The recommended stripping length is 9mm, and the supported wire cross-section is is - 2.5 mm

The CT rating for the grid measurement point must match the rating of the main circuit breaker. If the circuit breaker is rated at 63A or below, the included 63A CT is sufficient. If the incoming grid current exceeds 63A, you can use the complimentary 120A CT, which is shipped separately.

Anker SOLIX Smart Meter Gen 2 features a dual-CT measurement design. CT (GRID) measures the household main circuit. CT (PV/ESS) can be configured to measure the existing rooftop PV circuit for new solar-plus-storage installations or for adding storage to an existing PV system, or to monitor the loop current of an Anker SOLIX storage system to ensure safe operation of the home circuit.

Loading