Anker SOLIX Home Power Panel Cable

The solar input supports an 11-60V solar charger with an XT-60 connector. If you use an 11-32V solar charger, the current supports 10A max. When you use a 32-60V solar charger, the current supports 25A max.

If the power station is stored at a low capacity for a long time, lithium batteries will self-consume power which may lead to a quick discharge. This leads to poor conductivity and a reduced battery lifespan, resulting in poor battery performance.

To store your portable power station, make sure you have:
1. Turned off all outputs.
2. Store it in a cool and dry place.
3. Check the battery capacity each week. If it's below 30%, fully charge.
4. Charge the power station to 100% every 3 months.

In UPS mode, only the three 120V ports labeled "UPS" are operational; the 240V ports do not function.

Double-press the 240V power switch to activate EV mode charging, then you can recharge your EV.