Top Recommended Deals
Anker SOLIX F3800 + Smart Home Power Kit
Anker SOLIX F3800 + Smart Home Power Kit
- Industry-leading rigid solar panel conversion rate of up to 23%
- Note: the subpanel (12-circuit backup load center) included in Anker SOLIX Home Power Panel package can only be installed indoors.
- Seamlessly integrates Anker SOLIX F3800, utility grid, and roof solar power.
- Provides backup power for essential home appliances during outages.
- Easily control and monitor energy usage with the Anker app.
- Avoid peak rate charges and optimize energy consumption.
- Significantly promotes sustainability and self-sufficiency.
Pay with Ease
Trusted Delivery
Anker SOLIX F3800
The Most Accessible
Whole-Home Backup Power
Whole-Home Backup Power
Minimum Effort, Maximum Power
Can This Actually Power My House? Anker SOLIX F3800
Reviewed by Trent Palmer
Harness Solar Power for Daily Use
Add Anker SOLIX Home Power Panel and watch Anker SOLIX F3800 integrate your home power system, uniting the grid and rooftop solar panels. With the Anker app, you can manage energy and savings with modes like Self Consumption and Time-of-Use. Gain full control of solar power, optimizing battery cycles and reducing electric bills.
- AC
Coupling - Integrated with
Existing Solar Panels - Self-Consumption
Mode - Time-of-Use
Mode
Automatic Switchover During Outages
Enjoy seamless transition to backup power with Anker SOLIX F3800 and keep life powered on. It's built to power multiple appliances simultaneously with up to 12,000W output and scalable storage up to 53.8kWh. The battery even automatically charges if severe weather is forecasted.
Plug-and-Play Power for Any Situation
- Home Backup
- Professional Power
- Power for EVs
- Power for RVs
Select Power That Meets Your Needs
F3800 Plus
F3800
Specs
Generator bypass
Yes
No
AC Output Power
6,000W
1,800W
Input Votage
120V/240V
120V
Solar Input Power
11-165V=17A Max (1600W Max Each)
11-32V= 10A; 32V-60V= 25A; (1200W Max, firmware 1.7.8 or earlier version)
11-15V= 10A; 15V-60V= 27A Max; (1200W Max, firmware 2.1.1 or later version)
Solar Input
3200W
2400W(via XT-60)
Maximum AC Input Power
6,000W (via generator bypass)
1,800W
DC Input
2* Solar Input Port
1* 60V/120A DC Input
2* XT-60
Special AC Socket
1x NEMA TT-30 (3000W Max, 120V)
1x L14-30 (6000W Max, 240V)
1x NEMA 14-50 (6000W Max, 240V)
1x L14-30 (6000W Max, 240V)
FAQ
Q1: What should I do when using a solar charger to charge Anker SOLIX F3800?
The solar input supports an 11-60V solar charger with an XT-60 connector. If you use an 11-15V solar charger, the current supports 10A max. When you use a 15-60V solar charger, the current supports 27A max (firmware 2.1.1+).
Q2: Why is the power station not working after it hasn't been used for a long time?
If the power station is stored at a low capacity for a long time, lithium batteries will self-consume power which may lead to a quick discharge. This leads to poor conductivity and a reduced battery lifespan, resulting in poor battery performance.
Q3: How should I store and maintain the power station?
To store your portable power station, make sure you have:
1. Turned off all outputs.
2. Store it in a cool and dry place.
3. Check the battery capacity each week. If it's below 30%, fully charge.
4. Charge the power station to 100% every 3 months.
1. Turned off all outputs.
2. Store it in a cool and dry place.
3. Check the battery capacity each week. If it's below 30%, fully charge.
4. Charge the power station to 100% every 3 months.
Q4: When recharging Anker SOLIX F3800 Portable Power Station with AC power, can I use its 240V outlet to charge other devices?
No, when Anker SOLIX F3800 is recharging with AC power, you can only use its 120V UPS outlet to charge other devices.
Q5: How do I charge my electric vehicle?
Double-press the 240V power switch to activate EV mode charging, then you can recharge your EV.
Q6: What is the maximum solar panel voltage for charging Anker SOLIX F3800 Portable Power Station?
The maximum open-circuit voltage of each solar input port is 60V. If you want to chain the solar panels in series, the total open-circuit voltage must not exceed 60V.